Logo OMNJI
OMNJI

Cara Menggerakkan Servo Dorna Langsung dari PC Menggunakan Python (Tanpa PLC)


If you need high-speed real-time control (like CNC), Modbus is too slow. Instead, use an Arduino to generate pulses and Python to send commands to the Arduino.
  1. Arduino: Upload the StandardFirmata sketch.
  2. Python: Use pyfirmata to toggle a pin:
    from pyfirmata import Arduino
    board = Arduino('COM3')
    
    # Send pulses to Driver 'PULS' input
    while True:
        board.digital[9].write(1)
        board.pass_time(0.001) # Delay controls speed
        board.digital[9].write(0)
        board.pass_time(0.001)
    
Follow Up:
If you can provide the exact model number (e.g., EPS-B1-0D40AA), I can give you the exact Modbus register list for enabling the servo and setting the target speed.

Komentar